What Makes X-Ring Seals Better?

• 

Twice the Sealing Surface — Multi-lobed design provides more sealing surfaces than standard O-Rings.

• 

Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.

• 

Prevents Spiral Failure – The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.

• 

Reduced Leakage – Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.

• 

Better Lubricant Retention – Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.

• 

Less Force, Better Seal – Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.

• 

The Right Fit – X-Rings will fit in standard O-Ring grooves for most applications.
1 - 25 of 202 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Item #

C/S (inches)

C/S Tol +/-

I.D. (inches)

I.D. Tol +/-

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

5444-085 N/A .034 N/A .003 N/A .017 N/A .003 N/A .085 N/A N/A N/A
5444-086 N/A .036 N/A .003 N/A .013 N/A N/A .085 N/A N/A N/A
5444-142 N/A .046 N/A .003 N/A .050 N/A .004 N/A .142 N/A N/A N/A
5444-145 N/A .049 N/A .003 N/A .047 N/A .004 N/A .145 N/A N/A N/A
4444-002 N/A .050 N/A .003 N/A .042 N/A .003 N/A .142 N/A 3/64 N/A 3/64 N/A 9/64
5444-335 N/A .051 N/A .003 N/A .233 N/A .005 N/A .335 N/A N/A N/A
4444-003 N/A .060 N/A .003 N/A .056 N/A .004 N/A .176 N/A 1/16 N/A 1/16 N/A 11/64
5444-1.690 N/A .065 N/A .003 N/A 1.560 N/A .013 N/A 1.690 N/A N/A N/A
4444-004 N/A .070 N/A .003 N/A .070 N/A .005 N/A .210 N/A 1/16 N/A 5/64 N/A 13/64
4444-005 N/A .070 N/A .003 N/A .101 N/A .005 N/A .241 N/A 1/16 N/A 7/64 N/A 15/64
4444-006 N/A .070 N/A .003 N/A .114 N/A .005 N/A .254 N/A 1/16 N/A 1/8 N/A 1/4
4444-007 N/A .070 N/A .003 N/A .145 N/A .005 N/A .285 N/A 1/16 N/A 5/32 N/A 9/32
4444-008 N/A .070 N/A .003 N/A .176 N/A .005 N/A .316 N/A 1/16 N/A 3/16 N/A 5/16
4444-009 N/A .070 N/A .003 N/A .208 N/A .005 N/A .348 N/A 1/16 N/A 7/32 N/A 11/32
5444-359 N/A .070 N/A .003 N/A .219 N/A .005 N/A .359 N/A N/A N/A
4444-010 N/A .070 N/A .003 N/A .239 N/A .005 N/A .379 N/A 1/16 N/A 1/4 N/A 3/8
4444-011 N/A .070 N/A .003 N/A .301 N/A .005 N/A .441 N/A 1/16 N/A 5/16 N/A 7/16
4444-012 N/A .070 N/A .003 N/A .364 N/A .005 N/A .504 N/A 1/16 N/A 3/8 N/A 1/2
4444-013 N/A .070 N/A .003 N/A .426 N/A .005 N/A .566 N/A 1/16 N/A 7/16 N/A 9/16
4444-014 N/A .070 N/A .003 N/A .489 N/A .005 N/A .629 N/A 1/16 N/A 1/2 N/A 5/8
4444-015 N/A .070 N/A .003 N/A .551 N/A .007 N/A .691 N/A 1/16 N/A 9/16 N/A 11/16
4444-016 N/A .070 N/A .003 N/A .614 N/A .009 N/A .754 N/A 1/16 N/A 5/8 N/A 3/4
4444-017 N/A .070 N/A .003 N/A .676 N/A .009 N/A .816 N/A 1/16 N/A 11/16 N/A 13/16
4444-018 N/A .070 N/A .003 N/A .739 N/A .009 N/A .879 N/A 1/16 N/A 3/4 N/A 7/8
4444-019 N/A .070 N/A .003 N/A .801 N/A .009 N/A .941 N/A 1/16 N/A 13/16 N/A 15/16
1 - 25 of 202 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »