Print Back
What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves
Click here to view our Multiseal & X-Ring Brochure.
Unit of Measure

Specifications

C/S (inches)

N/A 0.210

C/S Tolerance (±)

N/A 0.005

I.D. (inches)

N/A 6.475

I.D. Tolerance (±)

N/A 0.040

O.D. (REF) (inches)

N/A 6.895

Nominal C/S (inches)

N/A 3/16

Nominal I.D. (inches)

N/A 6 1/2

Nominal O.D. (inches)

N/A 6 7/8