Precision Associates, Inc.
3800 North Washington Ave.
Minneapolis, MN 55412-2142
Toll Free:1-800-394-6590 • Local: 612-333-7464
Email: [email protected]
|
|
|
|
|
Item # 4-109, Multiseal® .299 inch I.D. and .505 O.D. (REF) Low Friction Seal
|
|
|
|
|
|
What Makes Multiseal® Low Friction Seals Better?- A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
- Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
- Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
- Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
- Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
- Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
- Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
- The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves
Click here to view our Multiseal & X-Ring Brochure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
