• Pile of X-Ring Seals
What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.
76 - 100 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.103 N/A 0.003 N/A 1.925 N/A 0.017 N/A 2.131 N/A 3/32 N/A 1 15/16 N/A 2 1/8
N/A 0.103 N/A 0.003 N/A 1.987 N/A 0.017 N/A 2.193 N/A 3/32 N/A 2 N/A 2 3/16
N/A 0.103 N/A 0.003 N/A 2.050 N/A 0.017 N/A 2.256 N/A 3/32 N/A 2 1/16 N/A 2 1/4
N/A 0.103 N/A 0.003 N/A 2.112 N/A 0.017 N/A 2.318 N/A 3/32 N/A 2 1/8 N/A 2 5/16
N/A 0.103 N/A 0.003 N/A 2.425 N/A 0.020 N/A 2.631 N/A 3/32 N/A 2 7/16 N/A 2 5/8
N/A 0.103 N/A 0.003 N/A 2.487 N/A 0.020 N/A 2.693 N/A 3/32 N/A 2 1/2 N/A 2 11/16
N/A 0.103 N/A 0.003 N/A 2.550 N/A 0.020 N/A 2.756 N/A 3/32 N/A 2 9/16 N/A 2 3/4
N/A 0.103 N/A 0.003 N/A 2.862 N/A 0.022 N/A 3.068 N/A 3/32 N/A 2 7/8 N/A 3 1/16
N/A 0.103 N/A 0.003 N/A 3.487 N/A 0.024 N/A 3.693 N/A 3/32 N/A 3 1/2 N/A 3 11/16
N/A 0.103 N/A 0.003 N/A 3.737 N/A 0.028 N/A 3.943 N/A 3/32 N/A 3 3/4 N/A 3 15/16
N/A 0.103 N/A 0.003 N/A 4.987 N/A 0.035 N/A 5.193 N/A 3/32 N/A 5 N/A 5 3/16
N/A 0.070 N/A 0.003 N/A 0.219 N/A 0.005 N/A 0.359 N/A N/A N/A
N/A 0.275 N/A 0.003 N/A 5.725 N/A 0.037 N/A 6.275 N/A 1/4 N/A 5 3/4 N/A 6 1/4
N/A 0.050 N/A 0.003 N/A 0.042 N/A 0.003 N/A 0.142 N/A 3/64 N/A 3/64 N/A 9/64
N/A 0.079 N/A 0.003 N/A 4.016 N/A 0.028 N/A 4.173 N/A N/A N/A
N/A 0.103 N/A 0.003 N/A 7.237 N/A 0.045 N/A 7.443 N/A 3/32 N/A 7 1/4 N/A 7 7/16
N/A 0.070 N/A 0.003 N/A 1.864 N/A 0.015 N/A 2.004 N/A N/A N/A
N/A 0.051 N/A 0.003 N/A .233 N/A 0.005 N/A 0.335 N/A N/A N/A
N/A 0.103 N/A 0.003 N/A 5.987 N/A 0.035 N/A 6.193 N/A 3/32 N/A 6 N/A 6 3/16
N/A 0.103 N/A 0.003 N/A 7.737 N/A 0.045 N/A 7.943 N/A 3/32 N/A 7 3/4 N/A 7 15/16
N/A 0.103 N/A 0.003 N/A 9.487 N/A 0.055 N/A 9.693 N/A 3/32 N/A 9 1/2 N/A 9 11/16
N/A 0.103 N/A 0.003 N/A 3.987 N/A 0.028 N/A 4.193 N/A 3/32 N/A 4 N/A 4 3/16
N/A 0.034 N/A 0.003 N/A 0.017 N/A 0.003 N/A 0.085 N/A N/A N/A
N/A 0.036 N/A 0.003 N/A .013 N/A N/A 0.085 N/A N/A N/A
N/A 0.049 N/A 0.003 N/A 0.047 N/A 0.004 N/A 0.145 N/A N/A N/A
76 - 100 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Go to Top