• Pile of X-Ring Seals
What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.
101 - 125 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.103 N/A 0.003 N/A 1.549 N/A 0.015 N/A 1.755 N/A 3/32 N/A 1 9/16 N/A 1 3/4
N/A 0.103 N/A 0.003 N/A 1.612 N/A 0.015 N/A 1.818 N/A 3/32 N/A 1 5/8 N/A 1 13/16
N/A 0.103 N/A 0.003 N/A 1.674 N/A 0.015 N/A 1.880 N/A 3/32 N/A 1 11/16 N/A 1 7/8
N/A 0.103 N/A 0.003 N/A 1.737 N/A 0.015 N/A 1.943 N/A 3/32 N/A 1 3/4 N/A 1 15/16
N/A 0.103 N/A 0.003 N/A 1.799 N/A 0.015 N/A 2.005 N/A 3/32 N/A 1 13/16 N/A 2
N/A 0.103 N/A 0.003 N/A 1.862 N/A 0.015 N/A 2.068 N/A 3/32 N/A 1 7/8 N/A 2 1/16
N/A 0.139 N/A 0.004 N/A 1.484 N/A 0.015 N/A 1.762 N/A 1/8 N/A 1 1/2 N/A 1 3/4
N/A 0.139 N/A 0.004 N/A 1.609 N/A 0.015 N/A 1.887 N/A 1/8 N/A 1 5/8 N/A 1 7/8
N/A 0.139 N/A 0.004 N/A 1.734 N/A 0.015 N/A 2.012 N/A 1/8 N/A 1 3/4 N/A 2
N/A 0.210 N/A 0.005 N/A 1.475 N/A 0.015 N/A 1.895 N/A 3/16 N/A 1 1/2 N/A 1 7/8
N/A 0.210 N/A 0.005 N/A 1.600 N/A 0.015 N/A 2.020 N/A 3/16 N/A 1 5/8 N/A 2
N/A 0.210 N/A 0.005 N/A 1.725 N/A 0.015 N/A 2.145 N/A 3/16 N/A 1 3/4 N/A 2 1/8
N/A 0.210 N/A 0.005 N/A 1.850 N/A 0.015 N/A 2.270 N/A 3/16 N/A 1 7/8 N/A 2 1/4
N/A 0.070 N/A 0.003 N/A 1.864 N/A 0.015 N/A 2.004 N/A N/A N/A
N/A 0.103 N/A 0.003 N/A 1.925 N/A 0.017 N/A 2.131 N/A 3/32 N/A 1 15/16 N/A 2 1/8
N/A 0.103 N/A 0.003 N/A 1.987 N/A 0.017 N/A 2.193 N/A 3/32 N/A 2 N/A 2 3/16
N/A 0.103 N/A 0.003 N/A 2.050 N/A 0.017 N/A 2.256 N/A 3/32 N/A 2 1/16 N/A 2 1/4
N/A 0.103 N/A 0.003 N/A 2.112 N/A 0.017 N/A 2.318 N/A 3/32 N/A 2 1/8 N/A 2 5/16
N/A 0.070 N/A 0.003 N/A 2.114 N/A 0.018 N/A 2.254 N/A 1/16 N/A 2 1/8 N/A 2 1/4
N/A 0.139 N/A 0.004 N/A 1.859 N/A 0.018 N/A 2.137 N/A 1/8 N/A 1 7/8 N/A 2 1/8
N/A 0.139 N/A 0.004 N/A 1.984 N/A 0.018 N/A 2.262 N/A 1/8 N/A 2 N/A 2 1/4
N/A 0.139 N/A 0.004 N/A 2.109 N/A 0.018 N/A 2.387 N/A 1/8 N/A 2 1/8 N/A 2 3/8
N/A 0.210 N/A 0.005 N/A 1.975 N/A 0.018 N/A 2.395 N/A 3/16 N/A 2 N/A 2 3/8
N/A 0.210 N/A 0.005 N/A 2.100 N/A 0.018 N/A 2.520 N/A 3/16 N/A 2 1/8 N/A 2 1/2
N/A 0.210 N/A 0.005 N/A 2.225 N/A 0.018 N/A 2.645 N/A 3/16 N/A 2 1/4 N/A 2 5/8
101 - 125 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Go to Top