• Pile of X-Ring Seals
What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.
126 - 150 of 202 | Results Per Page | View |
« 6 7 8 9 
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.210 N/A 0.005 N/A 2.350 N/A 0.018 N/A 2.770 N/A 3/16 N/A 2 3/8 N/A 2 3/4
N/A 0.103 N/A 0.003 N/A 2.425 N/A 0.020 N/A 2.631 N/A 3/32 N/A 2 7/16 N/A 2 5/8
N/A 0.103 N/A 0.003 N/A 2.487 N/A 0.020 N/A 2.693 N/A 3/32 N/A 2 1/2 N/A 2 11/16
N/A 0.103 N/A 0.003 N/A 2.550 N/A 0.020 N/A 2.756 N/A 3/32 N/A 2 9/16 N/A 2 3/4
N/A 0.139 N/A 0.004 N/A 2.234 N/A 0.020 N/A 2.512 N/A 1/8 N/A 2 1/4 N/A 2 1/2
N/A 0.139 N/A 0.004 N/A 2.359 N/A 0.020 N/A 2.637 N/A 1/8 N/A 2 3/8 N/A 2 5/8
N/A 0.139 N/A 0.004 N/A 2.484 N/A 0.020 N/A 2.762 N/A 1/8 N/A 2 1/2 N/A 2 3/4
N/A 0.139 N/A 0.004 N/A 2.609 N/A 0.020 N/A 2.887 N/A 1/8 N/A 2 5/8 N/A 2 7/8
N/A 0.210 N/A 0.005 N/A 2.475 N/A 0.020 N/A 2.895 N/A 3/16 N/A 2 1/2 N/A 2 7/8
N/A 0.210 N/A 0.005 N/A 2.600 N/A 0.020 N/A 3.020 N/A 3/16 N/A 2 5/8 N/A 3
N/A 0.210 N/A 0.005 N/A 2.725 N/A 0.020 N/A 3.145 N/A 3/16 N/A 2 3/4 N/A 3 1/8
N/A 0.210 N/A 0.005 N/A 2.850 N/A 0.020 N/A 3.270 N/A 3/16 N/A 2 7/8 N/A 3 1/4
N/A 0.103 N/A 0.003 N/A 2.862 N/A 0.022 N/A 3.068 N/A 3/32 N/A 2 7/8 N/A 3 1/16
N/A 0.070 N/A 0.003 N/A 3.239 N/A 0.024 N/A 3.379 N/A 1/16 N/A 3 1/4 N/A 3 3/8
N/A 0.103 N/A 0.003 N/A 3.487 N/A 0.024 N/A 3.693 N/A 3/32 N/A 3 1/2 N/A 3 11/16
N/A 0.139 N/A 0.004 N/A 2.734 N/A 0.024 N/A 3.012 N/A 1/8 N/A 2 3/4 N/A 3
N/A 0.139 N/A 0.004 N/A 2.859 N/A 0.024 N/A 3.137 N/A 1/8 N/A 2 7/8 N/A 3 1/8
N/A 0.139 N/A 0.004 N/A 2.984 N/A 0.024 N/A 3.262 N/A 1/8 N/A 3 N/A 3 1/4
N/A 0.139 N/A 0.004 N/A 3.109 N/A 0.024 N/A 3.387 N/A 1/8 N/A 3 1/8 N/A 3 3/8
N/A 0.139 N/A 0.004 N/A 3.234 N/A 0.024 N/A 3.512 N/A 1/8 N/A 3 1/4 N/A 3 1/2
N/A 0.139 N/A 0.004 N/A 3.359 N/A 0.024 N/A 3.637 N/A 1/8 N/A 3 3/8 N/A 3 5/8
N/A 0.139 N/A 0.004 N/A 3.484 N/A 0.024 N/A 3.762 N/A 1/8 N/A 3 1/2 N/A 3 3/4
N/A 0.210 N/A 0.005 N/A 2.975 N/A 0.024 N/A 3.395 N/A 3/16 N/A 3 N/A 3 3/8
N/A 0.210 N/A 0.005 N/A 3.100 N/A 0.024 N/A 3.520 N/A 3/16 N/A 3 1/8 N/A 3 1/2
N/A 0.210 N/A 0.005 N/A 3.225 N/A 0.024 N/A 3.645 N/A 3/16 N/A 3 1/4 N/A 3 5/8
126 - 150 of 202 | Results Per Page | View |
« 6 7 8 9 
Go to Top