• Pile of X-Ring Seals
What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.
51 - 75 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.139 N/A 0.004 N/A 0.484 N/A 0.005 N/A 0.762 N/A 1/8 N/A 1/2 N/A 3/4
N/A 0.070 N/A 0.003 N/A 0.551 N/A 0.007 N/A 0.691 N/A 1/16 N/A 9/16 N/A 11/16
N/A 0.103 N/A 0.003 N/A 0.549 N/A 0.007 N/A 0.755 N/A 3/32 N/A 9/16 N/A 3/4
N/A 0.139 N/A 0.004 N/A .546 N/A 0.007 N/A 0.824 N/A 1/8 N/A 9/16 N/A 13/16
N/A 0.070 N/A 0.003 N/A 0.614 N/A 0.009 N/A 0.754 N/A 1/16 N/A 5/8 N/A 3/4
N/A 0.103 N/A 0.003 N/A 0.612 N/A 0.009 N/A 0.818 N/A 3/32 N/A 5/8 N/A 13/16
N/A 0.139 N/A 0.004 N/A 0.609 N/A 0.009 N/A 0.887 N/A 1/8 N/A 5/8 N/A 7/8
N/A 0.210 N/A 0.005 N/A 0.600 N/A 0.009 N/A 1.020 N/A 3/16 N/A 5/8 N/A 1
N/A 0.070 N/A 0.003 N/A 0.676 N/A 0.009 N/A 0.816 N/A 1/16 N/A 11/16 N/A 13/16
N/A 0.103 N/A 0.003 N/A 0.674 N/A 0.009 N/A 0.880 N/A 3/32 N/A 11/16 N/A 7/8
N/A 0.139 N/A 0.004 N/A 0.672 N/A 0.009 N/A 0.950 N/A 1/8 N/A 11/16 N/A 15/16
N/A 0.210 N/A 0.005 N/A 0.662 N/A 0.009 N/A 1.082 N/A 3/16 N/A 11/16 N/A 1 1/16
N/A 0.070 N/A 0.003 N/A 0.739 N/A 0.009 N/A 0.879 N/A 1/16 N/A 3/4 N/A 7/8
N/A 0.103 N/A 0.003 N/A 0.737 N/A 0.009 N/A 0.943 N/A 3/32 N/A 3/4 N/A 15/16
N/A 0.139 N/A 0.004 N/A 0.734 N/A 0.010 N/A 1.012 N/A 1/8 N/A 3/4 N/A 1
N/A 0.070 N/A 0.003 N/A 0.801 N/A 0.009 N/A 0.941 N/A 1/16 N/A 13/16 N/A 15/16
N/A 0.103 N/A 0.003 N/A 0.799 N/A 0.010 N/A 1.005 N/A 3/32 N/A 13/16 N/A 1
N/A 0.139 N/A 0.004 N/A 0.796 N/A 0.010 N/A 1.074 N/A 1/8 N/A 13/16 N/A 1 1/16
N/A 0.070 N/A 0.003 N/A 0.864 N/A 0.009 N/A 1.004 N/A 1/16 N/A 7/8 N/A 1
N/A 0.103 N/A 0.003 N/A 0.862 N/A 0.010 N/A 1.068 N/A 3/32 N/A 7/8 N/A 1 1/16
N/A 0.139 N/A 0.004 N/A 0.859 N/A 0.010 N/A 1.137 N/A 1/8 N/A 7/8 N/A 1 1/8
N/A 0.210 N/A 0.005 N/A 0.850 N/A 0.010 N/A 1.270 N/A 3/16 N/A 7/8 N/A 1 1/4
N/A 0.070 N/A 0.003 N/A 0.926 N/A 0.009 N/A 1.066 N/A 1/16 N/A 15/16 N/A 1 1/16
N/A 0.103 N/A 0.003 N/A 0.924 N/A 0.010 N/A 1.130 N/A 3/32 N/A 15/16 N/A 1 1/8
N/A 0.139 N/A 0.004 N/A 0.921 N/A 0.010 N/A 1.199 N/A 1/8 N/A 15/16 N/A 1 3/16
51 - 75 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Go to Top