What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves
Unit of Measure
Items
Multiseal® Low Friction Seals

Multiseal® .114 inch I.D. and .254 O.D. (REF) Low Friction Seal

Multiseal® Low Friction Seals

Multiseal® .145 inch I.D. and .285 O.D. (REF) Low Friction Seal

Multiseal® Low Friction Seals

Multiseal® .176 inch I.D. and .316 O.D. (REF) Low Friction Seal

Multiseal® Low Friction Seals

Multiseal® .208 inch I.D. and .348 O.D. (REF) Low Friction Seal

Multiseal® Low Friction Seals

Multiseal® .239 inch I.D. and .379 O.D. (REF) Low Friction Seal
C/S (inches) N/A 0.070
C/S Tolerance (±) N/A 0.003
I.D. (inches) N/A 0.114 N/A 0.145 N/A 0.176 N/A 0.208 N/A 0.239
I.D. Tolerance (±) N/A 0.005
O.D. (REF) (inches) N/A 0.254 N/A 0.285 N/A 0.316 N/A 0.348 N/A 0.379
Nominal C/S (inches) N/A 1/16
Nominal I.D. (inches) N/A 1/8 N/A 5/32 N/A 3/16 N/A 7/32 N/A 1/4
Nominal O.D. (inches) N/A 1/4 N/A 9/32 N/A 5/16 N/A 11/32 N/A 3/8
Go to Top