Print Back
What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.
Pile of X-Ring Seals
Items X-Ring Low Friction Seals
5444-142
.050 inch I.D and .142 inch O.D. (REF) X-Ring Low Friction Seal
X-Ring Low Friction Seals
4444-003
.056 inch I.D and .176 inch O.D. (REF) X-Ring Low Friction Seal
X-Ring Low Friction Seals
5444-1.690
1.560 inch I.D and 1.690 inch O.D. (REF) X-Ring Low Friction Seal
X-Ring Low Friction Seals
4444-004
.070 inch I.D and .210 inch O.D. (REF) X-Ring Low Friction Seal
X-Ring Low Friction Seals
4444-005
.101 inch I.D and .241 inch O.D. (REF) X-Ring Low Friction Seal
C/S (inches) N/A 0.046 N/A 0.060 N/A 0.065 N/A 0.070 N/A 0.070
C/S Tolerance (±) N/A 0.003
I.D. (inches) N/A 0.050 N/A 0.056 N/A 1.560 N/A 0.070 N/A 0.101
I.D. Tolerance (±) N/A 0.004 N/A 0.004 N/A 0.013 N/A 0.005 N/A 0.005
O.D. (REF) (inches) N/A 0.142 N/A 0.176 N/A 1.690 N/A 0.210 N/A 0.241
Nominal C/S (inches) N/A N/A 1/16 N/A N/A 1/16 N/A 1/16
Nominal I.D. (inches) N/A N/A 1/16 N/A N/A 5/64 N/A 7/64
Nominal O.D. (inches) N/A N/A 11/64 N/A N/A 13/64 N/A 15/64