What Makes X-Ring Seals Better?
•Twice the Sealing Surface — Multi-lobed design provides more sealing surfaces than standard O-Rings.
•Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
•Prevents Spiral Failure – The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
•Reduced Leakage – Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
•Better Lubricant Retention – Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
•Less Force, Better Seal – Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
•The Right Fit – X-Rings will fit in standard O-Ring grooves for most applications.
|4444-002||N/A .050||N/A .003||N/A .042||N/A .003||N/A .142||N/A 3/64||N/A 3/64||N/A 9/64|
|4444-003||N/A .060||N/A .003||N/A .056||N/A .004||N/A .176||N/A 1/16||N/A 1/16||N/A 11/64|
|4444-004||N/A .070||N/A .003||N/A .070||N/A .005||N/A .210||N/A 1/16||N/A 5/64||N/A 13/64|
|4444-005||N/A .070||N/A .003||N/A .101||N/A .005||N/A .241||N/A 1/16||N/A 7/64||N/A 15/64|
|4444-006||N/A .070||N/A .003||N/A .114||N/A .005||N/A .254||N/A 1/16||N/A 1/8||N/A 1/4|
|4444-007||N/A .070||N/A .003||N/A .145||N/A .005||N/A .285||N/A 1/16||N/A 5/32||N/A 9/32|
|4444-008||N/A .070||N/A .003||N/A .176||N/A .005||N/A .316||N/A 1/16||N/A 3/16||N/A 5/16|
|4444-009||N/A .070||N/A .003||N/A .208||N/A .005||N/A .348||N/A 1/16||N/A 7/32||N/A 11/32|
|4444-010||N/A .070||N/A .003||N/A .239||N/A .005||N/A .379||N/A 1/16||N/A 1/4||N/A 3/8|
|4444-011||N/A .070||N/A .003||N/A .301||N/A .005||N/A .441||N/A 1/16||N/A 5/16||N/A 7/16|
|4444-012||N/A .070||N/A .003||N/A .364||N/A .005||N/A .504||N/A 1/16||N/A 3/8||N/A 1/2|
|4444-013||N/A .070||N/A .003||N/A .426||N/A .005||N/A .566||N/A 1/16||N/A 7/16||N/A 9/16|
|4444-014||N/A .070||N/A .003||N/A .489||N/A .005||N/A .629||N/A 1/16||N/A 1/2||N/A 5/8|
|4444-015||N/A .070||N/A .003||N/A .551||N/A .007||N/A .691||N/A 1/16||N/A 9/16||N/A 11/16|
|4444-016||N/A .070||N/A .003||N/A .614||N/A .009||N/A .754||N/A 1/16||N/A 5/8||N/A 3/4|
|4444-017||N/A .070||N/A .003||N/A .676||N/A .009||N/A .816||N/A 1/16||N/A 11/16||N/A 13/16|
|4444-018||N/A .070||N/A .003||N/A .739||N/A .009||N/A .879||N/A 1/16||N/A 3/4||N/A 7/8|
|4444-019||N/A .070||N/A .003||N/A .801||N/A .009||N/A .941||N/A 1/16||N/A 13/16||N/A 15/16|
|4444-020||N/A .070||N/A .003||N/A .864||N/A .009||N/A 1.004||N/A 1/16||N/A 7/8||N/A 1|
|4444-021||N/A .070||N/A .003||N/A .926||N/A .009||N/A 1.066||N/A 1/16||N/A 15/16||N/A 1 1/16|
|4444-022||N/A .070||N/A .003||N/A .989||N/A .010||N/A 1.129||N/A 1/16||N/A 1||N/A 1 1/8|
|4444-023||N/A .070||N/A .003||N/A 1.051||N/A .010||N/A 1.191||N/A 1/16||N/A 1 1/16||N/A 1 3/16|
|4444-024||N/A .070||N/A .003||N/A 1.114||N/A .010||N/A 1.254||N/A 1/16||N/A 1 1/8||N/A 1 1/4|
|4444-025||N/A .070||N/A .003||N/A 1.176||N/A .011||N/A 1.316||N/A 1/16||N/A 1 3/16||N/A 1 5/16|
|4444-026||N/A .070||N/A .003||N/A 1.239||N/A .011||N/A 1.379||N/A 1/16||N/A 1 1/4||N/A 1 3/8|