• Pile of X-Ring Seals
What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.
1 - 25 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.046 N/A 0.003 N/A 0.050 N/A 0.004 N/A 0.142 N/A N/A N/A
N/A 0.060 N/A 0.003 N/A 0.056 N/A 0.004 N/A 0.176 N/A 1/16 N/A 1/16 N/A 11/64
N/A 0.065 N/A 0.003 N/A 1.560 N/A 0.013 N/A 1.690 N/A N/A N/A
N/A 0.070 N/A 0.003 N/A 0.070 N/A 0.005 N/A 0.210 N/A 1/16 N/A 5/64 N/A 13/64
N/A 0.070 N/A 0.003 N/A 0.101 N/A 0.005 N/A 0.241 N/A 1/16 N/A 7/64 N/A 15/64
N/A 0.070 N/A 0.003 N/A 0.114 N/A 0.005 N/A 0.254 N/A 1/16 N/A 1/8 N/A 1/4
N/A 0.070 N/A 0.003 N/A 0.145 N/A 0.005 N/A 0.285 N/A 1/16 N/A 5/32 N/A 9/32
N/A 0.070 N/A 0.003 N/A 0.176 N/A 0.005 N/A 0.316 N/A 1/16 N/A 3/16 N/A 5/16
N/A 0.070 N/A 0.003 N/A 0.208 N/A 0.005 N/A 0.348 N/A 1/16 N/A 7/32 N/A 11/32
N/A 0.070 N/A 0.003 N/A 0.239 N/A 0.005 N/A 0.379 N/A 1/16 N/A 1/4 N/A 3/8
N/A 0.070 N/A 0.003 N/A 0.301 N/A 0.005 N/A 0.441 N/A 1/16 N/A 5/16 N/A 7/16
N/A 0.070 N/A 0.003 N/A 0.364 N/A 0.005 N/A 0.504 N/A 1/16 N/A 3/8 N/A 1/2
N/A 0.070 N/A 0.003 N/A 0.426 N/A 0.005 N/A 0.566 N/A 1/16 N/A 7/16 N/A 9/16
N/A 0.070 N/A 0.003 N/A 0.489 N/A 0.005 N/A 0.629 N/A 1/16 N/A 1/2 N/A 5/8
N/A 0.070 N/A 0.003 N/A 0.551 N/A 0.007 N/A 0.691 N/A 1/16 N/A 9/16 N/A 11/16
N/A 0.070 N/A 0.003 N/A 0.614 N/A 0.009 N/A 0.754 N/A 1/16 N/A 5/8 N/A 3/4
N/A 0.070 N/A 0.003 N/A 0.676 N/A 0.009 N/A 0.816 N/A 1/16 N/A 11/16 N/A 13/16
N/A 0.070 N/A 0.003 N/A 0.739 N/A 0.009 N/A 0.879 N/A 1/16 N/A 3/4 N/A 7/8
N/A 0.070 N/A 0.003 N/A 0.801 N/A 0.009 N/A 0.941 N/A 1/16 N/A 13/16 N/A 15/16
N/A 0.070 N/A 0.003 N/A 0.864 N/A 0.009 N/A 1.004 N/A 1/16 N/A 7/8 N/A 1
N/A 0.070 N/A 0.003 N/A 0.926 N/A 0.009 N/A 1.066 N/A 1/16 N/A 15/16 N/A 1 1/16
N/A 0.070 N/A 0.003 N/A 0.989 N/A 0.010 N/A 1.129 N/A 1/16 N/A 1 N/A 1 1/8
N/A 0.070 N/A 0.003 N/A 1.051 N/A 0.010 N/A 1.191 N/A 1/16 N/A 1 1/16 N/A 1 3/16
N/A 0.070 N/A 0.003 N/A 1.114 N/A 0.010 N/A 1.254 N/A 1/16 N/A 1 1/8 N/A 1 1/4
N/A 0.070 N/A 0.003 N/A 1.176 N/A 0.011 N/A 1.316 N/A 1/16 N/A 1 3/16 N/A 1 5/16
1 - 25 of 202 | Results Per Page | View |
 1 2 3 4 5 »  
Go to Top