What Makes X-Ring Seals Better?
•Twice the Sealing Surface — Multi-lobed design provides more sealing surfaces than standard O-Rings.
•Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
•Prevents Spiral Failure – The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
•Reduced Leakage – Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
•Better Lubricant Retention – Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
•Less Force, Better Seal – Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
•The Right Fit – X-Rings will fit in standard O-Ring grooves for most applications.
|5444-085||N/A .034||N/A .003||N/A .017||N/A .003||N/A .085||N/A||N/A||N/A|
|4444-002||N/A .050||N/A .003||N/A .042||N/A .003||N/A .142||N/A 3/64||N/A 3/64||N/A 9/64|
|4444-003||N/A .060||N/A .003||N/A .056||N/A .004||N/A .176||N/A 1/16||N/A 1/16||N/A 11/64|
|5444-142||N/A .046||N/A .003||N/A .050||N/A .004||N/A .142||N/A||N/A||N/A|
|5444-145||N/A .049||N/A .003||N/A .047||N/A .004||N/A .145||N/A||N/A||N/A|
|5444-377||N/A .071||N/A .003||N/A .237||N/A .004||N/A .379||N/A||N/A||N/A|
|5444-335||N/A .051||N/A .003||N/A .233||N/A .005||N/A .335||N/A||N/A||N/A|
|4444-004||N/A .070||N/A .003||N/A .070||N/A .005||N/A .210||N/A 1/16||N/A 5/64||N/A 13/64|
|4444-005||N/A .070||N/A .003||N/A .101||N/A .005||N/A .241||N/A 1/16||N/A 7/64||N/A 15/64|
|4444-006||N/A .070||N/A .003||N/A .114||N/A .005||N/A .254||N/A 1/16||N/A 1/8||N/A 1/4|
|4444-007||N/A .070||N/A .003||N/A .145||N/A .005||N/A .285||N/A 1/16||N/A 5/32||N/A 9/32|
|4444-008||N/A .070||N/A .003||N/A .176||N/A .005||N/A .316||N/A 1/16||N/A 3/16||N/A 5/16|
|4444-009||N/A .070||N/A .003||N/A .208||N/A .005||N/A .348||N/A 1/16||N/A 7/32||N/A 11/32|
|5444-359||N/A .070||N/A .003||N/A .219||N/A .005||N/A .359||N/A||N/A||N/A|
|4444-010||N/A .070||N/A .003||N/A .239||N/A .005||N/A .379||N/A 1/16||N/A 1/4||N/A 3/8|
|4444-011||N/A .070||N/A .003||N/A .301||N/A .005||N/A .441||N/A 1/16||N/A 5/16||N/A 7/16|
|4444-012||N/A .070||N/A .003||N/A .364||N/A .005||N/A .504||N/A 1/16||N/A 3/8||N/A 1/2|
|4444-013||N/A .070||N/A .003||N/A .426||N/A .005||N/A .566||N/A 1/16||N/A 7/16||N/A 9/16|
|4444-014||N/A .070||N/A .003||N/A .489||N/A .005||N/A .629||N/A 1/16||N/A 1/2||N/A 5/8|
|5444-323||N/A .089||N/A .003||N/A .145||N/A .005||N/A .323||N/A||N/A||N/A|
|5444-403||N/A .089||N/A .003||N/A .225||N/A .005||N/A .403||N/A||N/A||N/A|
|5444-481||N/A .089||N/A .003||N/A .303||N/A .005||N/A .481||N/A||N/A||N/A|
|5444-488||N/A .094||N/A .003||N/A .299||N/A .005||N/A .487||N/A||N/A||N/A|
|4444-102||N/A .103||N/A .003||N/A .050||N/A .005||N/A .256||N/A 3/32||N/A 1/16||N/A 1/4|
|4444-103||N/A .103||N/A .003||N/A .081||N/A .005||N/A .287||N/A 3/32||N/A 3/32||N/A 9/32|