What Makes X-Ring Seals Better?
•Twice the Sealing Surface — Multi-lobed design provides more sealing surfaces than standard O-Rings.
•Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
•Prevents Spiral Failure – The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
•Reduced Leakage – Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
•Better Lubricant Retention – Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
•Less Force, Better Seal – Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
•The Right Fit – X-Rings will fit in standard O-Ring grooves for most applications.
|5444-4.173||N/A .079||N/A .003||N/A 4.016||N/A .028||N/A 4.173||N/A||N/A||N/A|
|4444-434||N/A .275||N/A .006||N/A 5.600||N/A .037||N/A 6.125||N/A 1/4||N/A 5 5/8||N/A 6 1/8|
|4444-441||N/A .275||N/A .006||N/A 6.975||N/A .040||N/A 7.524||N/A 1/4||N/A 7||N/A 7 1/2|
|4444-313||N/A .210||N/A .005||N/A .662||N/A .009||N/A 1.082||N/A 3/16||N/A 11/16||N/A 1 1/16|
|5444-145||N/A .049||N/A .003||N/A .047||N/A .004||N/A .145||N/A||N/A||N/A|
|5444-359||N/A .070||N/A .003||N/A .219||N/A .005||N/A .359||N/A||N/A||N/A|
|4444-020||N/A .070||N/A .003||N/A .864||N/A .009||N/A 1.004||N/A 1/16||N/A 7/8||N/A 1|
|4444-117||N/A .103||N/A .003||N/A .799||N/A .010||N/A 1.005||N/A 3/32||N/A 13/16||N/A 1|
|4444-210||N/A .139||N/A .004||N/A .734||N/A .010||N/A 1.012||N/A 1/8||N/A 3/4||N/A 1|
|4444-021||N/A .070||N/A .003||N/A .926||N/A .009||N/A 1.066||N/A 1/16||N/A 15/16||N/A 1 1/16|
|4444-118||N/A .103||N/A .003||N/A .862||N/A .010||N/A 1.068||N/A 3/32||N/A 7/8||N/A 1 1/16|
|4444-211||N/A .139||N/A .004||N/A .796||N/A .010||N/A 1.074||N/A 1/8||N/A 13/16||N/A 1 1/16|
|4444-022||N/A .070||N/A .003||N/A .989||N/A .010||N/A 1.129||N/A 1/16||N/A 1||N/A 1 1/8|
|4444-212||N/A .139||N/A .004||N/A .859||N/A .010||N/A 1.137||N/A 1/8||N/A 7/8||N/A 1 1/8|
|4444-023||N/A .070||N/A .003||N/A 1.051||N/A .010||N/A 1.191||N/A 1/16||N/A 1 1/16||N/A 1 3/16|
|4444-120||N/A .103||N/A .003||N/A .987||N/A .010||N/A 1.193||N/A 3/32||N/A 1||N/A 1 3/16|
|4444-213||N/A .139||N/A .004||N/A .921||N/A .010||N/A 1.199||N/A 1/8||N/A 15/16||N/A 1 3/16|
|4444-024||N/A .070||N/A .003||N/A 1.114||N/A .010||N/A 1.254||N/A 1/16||N/A 1 1/8||N/A 1 1/4|
|4444-121||N/A .103||N/A .003||N/A 1.049||N/A .010||N/A 1.255||N/A 3/32||N/A 1 1/16||N/A 1 1/4|
|4444-214||N/A .139||N/A .004||N/A .984||N/A .010||N/A 1.262||N/A 1/8||N/A 1||N/A 1 1/4|
|4444-025||N/A .070||N/A .003||N/A 1.176||N/A .011||N/A 1.316||N/A 1/16||N/A 1 3/16||N/A 1 5/16|
|4444-122||N/A .103||N/A .003||N/A 1.112||N/A .010||N/A 1.318||N/A 3/32||N/A 1 1/8||N/A 1 5/16|
|4444-215||N/A .139||N/A .004||N/A 1.046||N/A .010||N/A 1.324||N/A 1/8||N/A 1 1/16||N/A 1 5/16|
|4444-026||N/A .070||N/A .003||N/A 1.239||N/A .011||N/A 1.379||N/A 1/16||N/A 1 1/4||N/A 1 3/8|
|4444-216||N/A .139||N/A .004||N/A 1.109||N/A .012||N/A 1.387||N/A 1/8||N/A 1 1/8||N/A 1 3/8|