What Makes X-Ring Seals Better?
•Twice the Sealing Surface — Multi-lobed design provides more sealing surfaces than standard O-Rings.
•Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
•Prevents Spiral Failure – The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
•Reduced Leakage – Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
•Better Lubricant Retention – Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
•Less Force, Better Seal – Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
•The Right Fit – X-Rings will fit in standard O-Ring grooves for most applications.
|4444-002||N/A .050||N/A .003||N/A .042||N/A .003||N/A .142||N/A 3/64||N/A 3/64||N/A 9/64|
|4444-003||N/A .060||N/A .003||N/A .056||N/A .004||N/A .176||N/A 1/16||N/A 1/16||N/A 11/64|
|4444-102||N/A .103||N/A .003||N/A .050||N/A .005||N/A .256||N/A 3/32||N/A 1/16||N/A 1/4|
|4444-004||N/A .070||N/A .003||N/A .070||N/A .005||N/A .210||N/A 1/16||N/A 5/64||N/A 13/64|
|4444-103||N/A .103||N/A .003||N/A .081||N/A .005||N/A .287||N/A 3/32||N/A 3/32||N/A 9/32|
|4444-005||N/A .070||N/A .003||N/A .101||N/A .005||N/A .241||N/A 1/16||N/A 7/64||N/A 15/64|
|4444-006||N/A .070||N/A .003||N/A .114||N/A .005||N/A .254||N/A 1/16||N/A 1/8||N/A 1/4|
|4444-104||N/A .103||N/A .003||N/A .112||N/A .005||N/A .318||N/A 3/32||N/A 1/8||N/A 5/16|
|4444-105||N/A .103||N/A .003||N/A .143||N/A .005||N/A .349||N/A 3/32||N/A 5/32||N/A 11/32|
|4444-007||N/A .070||N/A .003||N/A .145||N/A .005||N/A .285||N/A 1/16||N/A 5/32||N/A 9/32|
|4444-008||N/A .070||N/A .003||N/A .176||N/A .005||N/A .316||N/A 1/16||N/A 3/16||N/A 5/16|
|4444-106||N/A .103||N/A .003||N/A .175||N/A .005||N/A .381||N/A 3/32||N/A 3/16||N/A 3/8|
|4444-201||N/A .139||N/A .004||N/A .171||N/A .005||N/A .449||N/A 1/8||N/A 3/16||N/A 7/16|
|4444-107||N/A .103||N/A .003||N/A .206||N/A .005||N/A .412||N/A 3/32||N/A 7/32||N/A 13/32|
|4444-009||N/A .070||N/A .003||N/A .208||N/A .005||N/A .348||N/A 1/16||N/A 7/32||N/A 11/32|
|4444-108||N/A .103||N/A .003||N/A .237||N/A .005||N/A .443||N/A 3/32||N/A 1/4||N/A 7/16|
|4444-202||N/A .139||N/A .004||N/A .234||N/A .005||N/A .512||N/A 1/8||N/A 1/4||N/A 1/2|
|4444-010||N/A .070||N/A .003||N/A .239||N/A .005||N/A .379||N/A 1/16||N/A 1/4||N/A 3/8|
|4444-011||N/A .070||N/A .003||N/A .301||N/A .005||N/A .441||N/A 1/16||N/A 5/16||N/A 7/16|
|4444-203||N/A .139||N/A .004||N/A .301||N/A .005||N/A .579||N/A 1/8||N/A 5/16||N/A 9/16|
|4444-109||N/A .103||N/A .003||N/A .299||N/A .005||N/A .505||N/A 3/32||N/A 5/16||N/A 1/2|
|4444-110||N/A .103||N/A .003||N/A .362||N/A .005||N/A .568||N/A 3/32||N/A 3/8||N/A 9/16|
|4444-204||N/A .139||N/A .004||N/A .359||N/A .005||N/A .637||N/A 1/8||N/A 3/8||N/A 5/8|
|4444-012||N/A .070||N/A .003||N/A .364||N/A .005||N/A .504||N/A 1/16||N/A 3/8||N/A 1/2|
|4444-013||N/A .070||N/A .003||N/A .426||N/A .005||N/A .566||N/A 1/16||N/A 7/16||N/A 9/16|