Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > Multiseal® Low Friction Seals > View Items  

Multiseal® Low Friction Seals

 
Check up to five results to perform an action.

What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 51 - 75 of 154  1 2 3 4 5 »  

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)
4-160 0.103 0.003 5.237 0.035 5.443 3/32 5 1/4 5 7/16
4-165 0.103 0.003 6.487 0.040 6.693 3/32 6 1/2 6 11/16
4-166 0.103 0.003 6.737 0.040 6.943 3/32 6 3/4 6 15/16
4-204 0.139 0.004 0.359 0.005 0.637 1/8 3/8 5/8
4-205 0.139 0.004 0.421 0.005 0.699 1/8 7/16 11/16
4-206 0.139 0.004 0.484 0.005 0.762 1/8 1/2 3/4
4-207 0.139 0.004 .546 0.007 0.824 1/8 9/16 13/16
4-208 0.139 0.004 0.609 0.009 0.887 1/8 5/8 7/8
4-209 0.139 0.004 0.672 0.009 0.950 1/8 11/16 15/16
4-210 0.139 0.004 0.734 0.010 1.012 1/8 3/4 1
4-211 0.139 0.004 0.796 0.010 1.074 1/8 13/16 1 1/16
4-212 0.139 0.004 0.859 0.010 1.137 1/8 7/8 1 1/8
4-213 0.139 0.004 0.921 0.010 1.199 1/8 15/16 1 3/16
4-214 0.139 0.004 0.984 0.010 1.262 1/8 1 1 1/4
4-215 0.139 0.004 1.046 0.010 1.324 1/8 1 1/16 1 5/16
4-216 0.139 0.004 1.109 0.012 1.387 1/8 1 1/8 1 3/8
4-217 0.139 0.004 1.171 0.012 1.449 1/8 1 3/16 1 7/16
4-218 0.139 0.004 1.234 0.012 1.512 1/8 1 1/4 1 1/2
4-219 0.139 0.004 1.296 0.012 1.574 1/8 1 5/16 1 9/16
4-220 0.139 0.004 1.359 0.012 1.637 1/8 1 3/8 1 5/8
4-221 0.139 0.004 1.421 0.012 1.699 1/8 1 7/16 1 11/16
4-222 0.139 0.004 1.484 0.015 1.762 1/8 1 1/2 1 3/4
4-223 0.139 0.004 1.609 0.015 1.887 1/8 1 5/8 1 7/8
4-224 0.139 0.004 1.734 0.015 2.012 1/8 1 3/4 2
4-225 0.139 0.004 1.859 0.018 2.137 1/8 1 7/8 2 1/8
  Results 51 - 75 of 154  1 2 3 4 5 »  
Site Map | Site Credits: Ecreativeworks