Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > Multiseal® Low Friction Seals > View Items  

Multiseal® Low Friction Seals

 
Check up to five results to perform an action.

What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 76 - 100 of 154  1 2 3 4 5 »  

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)
4-226 0.139 0.004 1.984 0.018 2.262 1/8 2 2 1/4
4-227 0.139 0.004 2.109 0.018 2.387 1/8 2 1/8 2 3/8
4-228 0.139 0.004 2.234 0.020 2.512 1/8 2 1/4 2 1/2
4-229 0.139 0.004 2.359 0.020 2.637 1/8 2 3/8 2 5/8
4-230 0.139 0.004 2.484 0.020 2.762 1/8 2 1/2 2 3/4
4-231 0.139 0.004 2.609 0.020 2.887 1/8 2 5/8 2 7/8
4-232 0.139 0.004 2.734 0.024 3.012 1/8 2 3/4 3
4-233 0.139 0.004 2.859 0.024 3.137 1/8 2 7/8 3 1/8
4-234 0.139 0.004 2.984 0.024 3.262 1/8 3 3 1/4
4-235 0.139 0.004 3.109 0.024 3.387 1/8 3 1/8 3 3/8
4-236 0.139 0.004 3.234 0.024 3.512 1/8 3 1/4 3 1/2
4-237 0.139 0.004 3.359 0.024 3.637 1/8 3 3/8 3 5/8
4-238 0.139 0.004 3.484 0.024 3.762 1/8 3 1/2 3 3/4
4-240 0.139 0.004 3.734 0.028 4.012 1/8 3 3/4 4
4-241 0.139 0.004 3.859 0.028 4.137 1/8 3 7/8 4 1/8
4-244 0.139 0.004 4.234 0.030 4.512 1/8 4 1/4 4 1/2
4-245 0.139 0.004 4.359 0.030 4.637 1/8 4 3/8 4 5/8
4-248 0.139 0.004 4.734 0.030 5.012 1/8 4 3/4 5
4-249 0.139 0.004 4.859 0.035 5.137 1/8 4 7/8 5 1/8
4-250 0.139 0.004 4.984 0.035 5.262 1/8 5 5 1/4
4-252 0.139 0.004 5.234 0.035 5.512 1/8 5 1/4 5 1/2
4-253 0.139 0.004 5.359 0.035 5.637 1/8 5 3/8 5 5/8
4-256 0.139 0.004 5.734 0.035 6.012 1/8 5 3/4 6
4-259 0.139 0.004 6.234 0.040 6.512 1/8 6 1/4 6 1/2
4-260 0.139 0.004 6.484 0.040 6.762 1/8 6 1/2 6 3/4
  Results 76 - 100 of 154  1 2 3 4 5 »  
Site Map | Site Credits: Ecreativeworks