Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > Multiseal® Low Friction Seals > View Items  

Multiseal® Low Friction Seals

 
Check up to five results to perform an action.

What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 126 - 150 of 154 « 6 7 

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)
4-345 0.210 0.005 3.975 0.028 4.395 3/16 4 4 3/8
4-346 0.210 0.005 4.100 0.028 4.520 3/16 4 1/8 4 1/2
4-347 0.210 0.005 4.225 0.030 4.645 3/16 4 1/4 4 5/8
4-348 0.210 0.005 4.350 0.030 4.770 3/16 4 3/8 4 3/4
4-349 0.210 0.005 4.475 0.030 4.895 3/16 4.5 4 7/8
4-350 0.210 0.005 4.600 0.030 5.020 3/16 4 5/8 5
4-352 0.210 0.005 4.850 0.030 5.270 3/16 4 7/8 5 1/4
4-357 0.210 0.005 5.475 0.037 5.895 3/16 5 1/2 5 7/8
4-3625 0.210 0.005 6.350 0.040 6.770 3/16 6 3/8 6 3/4
4-363 0.210 0.005 6.475 0.040 6.895 3/16 6 1/2 6 7/8
4-366 0.210 0.005 7.225 0.045 7.645 3/16 7 1/2 7 5/8
4-369 0.210 0.005 7.975 0.045 8.395 3/16 8 8 3/8
4-425 0.275 0.006 4.475 0.033 5.025 1/4 4.5 5
4-428 0.275 0.006 4.850 0.033 5.400 1/4 4 7/8 5 3/8
4-429 0.275 0.006 4.975 0.037 5.525 1/4 5 5 1/2
4-431 0.275 0.006 5.225 0.037 5.775 1/4 5 1/4 5 3/4
4-432 0.275 0.006 5.350 0.037 5.900 1/4 5 3/8 5 7/8
4-443 0.275 0.006 5.475 0.037 6.025 1/4 5 1/2 6
4-437 0.275 0.006 5.975 0.037 6.525 1/4 6 6 1/2
4-438 0.275 0.006 6.225 0.040 6.775 1/4 6 1/4 6 3/4
4-439 0.275 0.006 6.475 0.040 7.025 1/4 6 1/2 7
4-441 0.275 0.006 6.975 0.040 7.525 1/4 7 7 1/2
4-443 0.275 0.006 7.475 0.045 8.025 1/4 7 1/4 8
4-445 0.275 0.006 7.975 0.045 8.525 1/4 8 8 1/2
4-446 0.275 0.006 8.475 0.055 9.025 1/4 8 1/2 9
  Results 126 - 150 of 154 « 6 7 
Site Map | Site Credits: Ecreativeworks