Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > X-Ring Low Friction Seals > View Items  

X-Ring Low Friction Seals

 
Check up to five results to perform an action.

What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

X-Ring and Multiseal Brochure
(PDF, 136KB)

X-Ring Features
(PDF, 454KB)

Compare Items
   
  Results 126 - 150 of 202 « 6 7 8 9 

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)
4444-244 0.139 0.004 4.234 0.030 4.512 1/8 4 1/4 4 1/2
4444-264 0.139 0.004 7.484 0.045 7.762 1/8 7 1/4 7 3/4
4444-265 0.139 0.004 7.734 0.045 8.012 1/8 7 3/4 8
5444-9.434 0.139 0.004 9.156 0.050 9.434 1/8 N/A N/A
5444-7.419 0.139 0.004 7.173 0.040 7.419 1/8 N/A N/A
4444-312 0.210 0.005 0.600 0.009 1.020 3/16 5/8 1
4444-320 0.210 0.005 1.100 0.012 1.520 3/16 1 1/8 1 1/2
4444-322 0.210 0.005 1.225 0.012 1.645 3/16 1 1/4 1 5/8
4444-324 0.210 0.005 1.350 0.012 1.770 3/16 1 3/8 1 3/4
4444-325 0.210 0.005 1.475 0.015 1.895 3/16 1 1/2 1 7/8
4444-326 0.210 0.005 1.600 0.015 2.020 3/16 1 5/8 2
4444-327 0.210 0.005 1.725 0.015 2.145 3/16 1 3/4 2 1/8
4444-328 0.210 0.005 1.850 0.015 2.270 3/16 1 7/8 2 1/4
4444-329 0.210 0.005 1.975 0.018 2.395 3/16 2 2 3/8
4444-330 0.210 0.005 2.100 0.018 2.520 3/16 2 1/8 2 1/2
4444-331 0.210 0.005 2.225 0.018 2.645 3/16 2 1/4 2 5/8
4444-332 0.210 0.005 2.350 0.018 2.770 3/16 2 3/8 2 3/4
4444-333 0.210 0.005 2.475 0.020 2.895 3/16 2 1/2 2 7/8
4444-334 0.210 0.005 2.600 0.020 3.020 3/16 2 5/8 3
4444-335 0.210 0.005 2.725 0.020 3.145 3/16 2 3/4 3 1/8
4444-336 0.210 0.005 2.850 0.020 3.270 3/16 2 7/8 3 1/4
4444-337 0.210 0.005 2.975 0.024 3.395 3/16 3 3 3/8
4444-338 0.210 0.005 3.100 0.024 3.520 3/16 3 1/8 3 1/2
4444-339 0.210 0.005 3.225 0.024 3.645 3/16 3 1/4 3 5/8
4444-340 0.210 0.005 3.350 0.024 3.770 3/16 3 3/8 3 3/4
  Results 126 - 150 of 202 « 6 7 8 9 
Site Map | Site Credits: Ecreativeworks