Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > X-Ring Low Friction Seals > Item # 4444-010  

Item # 4444-010, .239 inch I.D and .379 inch O.D. (REF) X-Ring Low Friction Seal

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  1. The four lobed design provides twice the sealing surface of a standard O-Ring.
  2. Because of the double-sealing action, less squeeze is required to maintain an effective seal. The reduction in squeeze means less friction and wear which will increase seal life and lower maintenance costs.
  3. Unlike an O-Ring where the parting line is found on the sealing surface, the X-Ring seals' parting line is located between the lobes away from the sealing surface.
  4. The four-lobed configuration of the X-Ring resists distortion called "Spiral Twist" that is sometimes encountered by an O-Ring.
  5. The grooves on the inside and outside diameter of the X-Ring retain lubricant thereby lowering friction and extending packing life.
  6. The X-Ring fits into grooves designed for and O-Ring so there should be limited problems retrofitting the seal
Click here to view our X-Ring & Multiseal Brochure.




 Specifications   

C/S (inches)
0.070

C/S Tolerance (±)
0.003

I.D. (inches)
0.239

I.D. Tolerance (±)
0.005

O.D. (REF) (inches)
0.379

Nominal C/S (inches)
1/16

Nominal I.D. (inches)
1/4

Nominal O.D. (inches)
3/8


 DOWNLOADS 

X-Ring and Multiseal Brochure
(PDF, 867KB)


Site Map | Site Credits: Ecreativeworks