• Multiseal® Low Friction Seals
What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves
151 - 154 of 154 | Results Per Page | View | Unit of Measure
« 6 7 
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.070 N/A 0.003 N/A 0.208 N/A 0.005 N/A 0.348 N/A 1/16 N/A 7/32 N/A 11/32
N/A 0.070 N/A 0.003 N/A 0.176 N/A 0.005 N/A 0.316 N/A 1/16 N/A 3/16 N/A 5/16
N/A 0.070 N/A 0.003 N/A 0.145 N/A 0.005 N/A 0.285 N/A 1/16 N/A 5/32 N/A 9/32
N/A 0.070 N/A 0.003 N/A 0.114 N/A 0.005 N/A 0.254 N/A 1/16 N/A 1/8 N/A 1/4
151 - 154 of 154 | Results Per Page | View | Unit of Measure
« 6 7 
Go to Top