• Multiseal® Low Friction Seals
What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves
26 - 50 of 154 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  
Request Information Compare Items Search by Specification

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)

Sort by
N/A 0.070 N/A 0.003 N/A 0.739 N/A 0.009 N/A 0.879 N/A 1/16 N/A 3/4 N/A 7/8
N/A 0.103 N/A 0.003 N/A 0.737 N/A 0.009 N/A 0.943 N/A 3/32 N/A 3/4 N/A 15/16
N/A 0.139 N/A 0.004 N/A 0.734 N/A 0.010 N/A 1.012 N/A 1/8 N/A 3/4 N/A 1
N/A 0.070 N/A 0.003 N/A 0.801 N/A 0.009 N/A 0.941 N/A 1/16 N/A 13/16 N/A 15/16
N/A 0.103 N/A 0.003 N/A 0.799 N/A 0.010 N/A 1.005 N/A 3/32 N/A 13/16 N/A 1
N/A 0.139 N/A 0.004 N/A 0.796 N/A 0.010 N/A 1.074 N/A 1/8 N/A 13/16 N/A 1 1/16
N/A 0.070 N/A 0.003 N/A 0.864 N/A 0.009 N/A 1.004 N/A 1/16 N/A 7/8 N/A 1
N/A 0.103 N/A 0.003 N/A 0.862 N/A 0.010 N/A 1.068 N/A 3/32 N/A 7/8 N/A 1 1/16
N/A 0.139 N/A 0.004 N/A 0.859 N/A 0.010 N/A 1.137 N/A 1/8 N/A 7/8 N/A 1 1/8
N/A 0.070 N/A 0.003 N/A 0.926 N/A 0.009 N/A 1.066 N/A 1/16 N/A 15/16 N/A 1 1/16
N/A 0.103 N/A 0.003 N/A 0.924 N/A 0.010 N/A 1.130 N/A 3/32 N/A 15/16 N/A 1 1/8
N/A 0.139 N/A 0.004 N/A 0.921 N/A 0.010 N/A 1.199 N/A 1/8 N/A 15/16 N/A 1 3/16
N/A 0.070 N/A 0.003 N/A 0.989 N/A 0.010 N/A 1.129 N/A 1/16 N/A 1 N/A 1 1/8
N/A 0.139 N/A 0.004 N/A 0.984 N/A 0.010 N/A 1.262 N/A 1/8 N/A 1 N/A 1 1/4
N/A 0.103 N/A 0.003 N/A 1.049 N/A 0.010 N/A 1.255 N/A 3/32 N/A 1 1/16 N/A 1 1/4
N/A 0.139 N/A 0.004 N/A 1.046 N/A 0.010 N/A 1.324 N/A 1/8 N/A 1 1/16 N/A 1 5/16
N/A 0.070 N/A 0.003 N/A 1.114 N/A 0.010 N/A 1.254 N/A 1/16 N/A 1 1/8 N/A 1 1/4
N/A 0.103 N/A 0.003 N/A 1.112 N/A 0.010 N/A 1.318 N/A 3/32 N/A 1 1/8 N/A 1 5/16
N/A 0.139 N/A 0.004 N/A 1.109 N/A 0.012 N/A 1.387 N/A 1/8 N/A 1 1/8 N/A 1 3/8
N/A 0.139 N/A 0.004 N/A 1.171 N/A 0.012 N/A 1.449 N/A 1/8 N/A 1 3/16 N/A 1 7/16
N/A 0.103 N/A 0.003 N/A 1.237 N/A 0.012 N/A 1.443 N/A 3/32 N/A 1 1/4 N/A 1 7/16
N/A 0.139 N/A 0.004 N/A 1.234 N/A 0.012 N/A 1.512 N/A 1/8 N/A 1 1/4 N/A 1 1/2
N/A 0.103 N/A 0.003 N/A 1.299 N/A 0.012 N/A 1.505 N/A 3/32 N/A 1 5/16 N/A 1 1/2
N/A 0.139 N/A 0.004 N/A 1.296 N/A 0.012 N/A 1.574 N/A 1/8 N/A 1 5/16 N/A 1 9/16
N/A 0.070 N/A 0.003 N/A 1.364 N/A 0.013 N/A 1.504 N/A 1/16 N/A 1 3/8 N/A 1 1/2
26 - 50 of 154 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  
Go to Top