Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > Multiseal® Low Friction Seals > View Items  

Multiseal® Low Friction Seals

 
Check up to five results to perform an action.

What Makes Multiseal® Low Friction Seals Better?
  • A better seal - The multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Increases life for the seal ring - With multiple seal points, less squeeze is required to provide an effective seal. This means less friction and wear which will increase seal life and lower maintenance costs.
  • Prevents spiral failure - The square cross sections resist distortion called "spiral twist" that may be encountered when using O-Rings.
  • Puts parting lines where they belong - Unlike an O-Ring, where the parting line is found on the only sealing surface, the parting lines of Multiseal® low friction seals and X-Ring compression seals are located in the center of the cross section away from the primary sealing surfaces.
  • Better lubricant retention - The grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Saves space, reduces cost - One Multiseal® low friction seal can replace two U-Cups in many applications.
  • Less force, better seal - Lower breakaway force and reduced operating pressures make them ideal in reciprocating applications.
  • The right fit - Multiseal® low friction seals will fit in standard O-Ring grooves

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 26 - 50 of 154  1 2 3 4 5 »  

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)
4-110 0.103 0.003 0.362 0.005 0.568 3/32 3/8 9/16
4-111 0.103 0.003 0.424 0.005 0.630 3/32 7/16 5/8
4-112 0.103 0.003 0.487 0.005 0.693 3/32 1/2 11/16
4-113 0.103 0.003 0.549 0.007 0.755 3/32 9/16 3/4
4-114 0.103 0.003 0.612 0.009 0.818 3/32 5/8 13/16
4-115 0.103 0.003 0.674 0.009 0.880 3/32 11/16 7/8
4-116 0.103 0.003 0.737 0.009 0.943 3/32 3/4 15/16
4-117 0.103 0.003 0.799 0.010 1.005 3/32 13/16 1
4-118 0.103 0.003 0.862 0.010 1.068 3/32 7/8 1 1/16
4-119 0.103 0.003 0.924 0.010 1.130 3/32 15/16 1 1/8
4-121 0.103 0.003 1.049 0.010 1.255 3/32 1 1/16 1 1/4
4-122 0.103 0.003 1.112 0.010 1.318 3/32 1 1/8 1 5/16
4-124 0.103 0.003 1.237 0.012 1.443 3/32 1 1/4 1 7/16
4-125 0.103 0.003 1.299 0.012 1.505 3/32 1 5/16 1 1/2
4-127 0.103 0.003 1.424 0.012 1.630 3/32 1 7/16 1 5/8
4-128 0.103 0.003 1.487 0.012 1.693 3/32 1 1/2 1 11/16
4-129 0.103 0.003 1.549 0.015 1.755 3/32 1 9/16 1 3/4
4-130 0.103 0.003 1.612 0.015 1.818 3/32 1 5/8 1 13/16
4-133 0.103 0.003 1.799 0.015 2.005 3/32 1 13/16 2
4-136 0.103 0.003 1.987 0.017 2.193 3/32 2 2 3/16
4-140 0.103 0.003 2.237 0.017 2.443 3/32 2 1/4 2 7/16
4-142 0.103 0.003 2.362 0.020 2.568 3/32 2 3/8 2 9/16
4-144 0.103 0.003 2.487 0.020 2.693 3/32 2 1/2 2 11/16
4-152 0.103 0.003 3.237 0.024 3.443 3/32 3 1/4 3 7/16
4-159 0.103 0.003 4.987 0.035 5.193 3/32 5 5 3/16
  Results 26 - 50 of 154  1 2 3 4 5 »  
Site Map | Site Credits: Ecreativeworks