Standard Products O-Rings Multiseals Rod Wipers U-Cups Kurv-Baks X-Rings V-Rings Rubber Balls Pull Thru Hol-Masks Tapered Hol-Masks Custom Seals Special Products Materials/Compounds Materials/Polymers Browse Our Catalogue
Rubber Seal Solutions...YOUR WAY!isdnfpaISO_Cert_20103a_2010NSF
All Categories > Product Catalog > X-Ring Low Friction Seals > View Items  

X-Ring Low Friction Seals

 
Check up to five results to perform an action.

What Makes X-Ring Seals Better?
  • Twice the Sealing Surface - Multi-lobed design provides more sealing surfaces than standard O-Rings.
  • Prolonged Seal Life – With multiple seal points, less squeeze is required to provide an effective seal. Less friction and wear will increase seal life and lower maintenance costs.
  • Prevents Spiral Failure - The “X” profile creates a stable seal that is more resistant to rolling in a groove than an O-Ring when used in a dynamic application.
  • Reduced Leakage - Parting lines of X-Ring seals are located in the valley between the lobes away from the critical sealing surface.
  • Better Lubricant Retention - Grooves on the inside and outside diameter of these rings retain lubricant thereby lowering friction and extending packing life.
  • Less Force, Better Seal - Lower breakaway forces and reduced operating pressures make them ideal in reciprocating applications.
  • The Right Fit - X-Rings will fit in standard O-Ring grooves for most applications.

Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

X-Ring and Multiseal Brochure
(PDF, 136KB)

X-Ring Features
(PDF, 454KB)

Compare Items
   
  Results 26 - 50 of 202  1 2 3 4 5 »  

Item #

C/S (inches)

C/S Tolerance (±)

I.D. (inches)

I.D. Tolerance (±)

O.D. (REF) (inches)

Nominal C/S (inches)

Nominal I.D. (inches)

Nominal O.D. (inches)
4444-026 0.070 0.003 1.239 0.011 1.379 1/16 1 1/4 1 3/8
4444-027 0.070 0.003 1.301 0.011 1.441 1/16 1 5/16 1 7/16
4444-028 0.070 0.003 1.364 0.013 1.504 1/16 1 3/8 1 1/2
4444-029 0.070 0.003 1.489 0.013 1.629 1/16 1 1/2 1 5/8
4444-030 0.070 0.003 1.614 0.013 1.754 1/16 1 5/8 1 3/4
4444-031 0.070 0.003 1.739 0.015 1.879 1/16 1 3/4 1 7/8
4444-034 0.070 0.003 2.114 0.018 2.254 1/16 2 1/8 2 1/4
4444-042 0.070 0.003 3.239 0.024 3.379 1/16 3 1/4 3 3/8
5444-377 0.071 0.003 0.237 0.004 0.379 N/A N/A N/A
5444-323 0.089 0.003 0.145 0.005 0.323 N/A N/A N/A
5444-403 0.089 0.003 .225 0.005 0.403 N/A N/A N/A
5444-481 0.089 0.003 .303 0.005 0.481 N/A N/A N/A
5444-488 0.094 0.003 0.299 0.005 .487 N/A N/A N/A
4444-102 0.103 0.003 0.050 0.005 0.256 3/32 1/16 1/4
4444-103 0.103 0.003 0.081 0.005 0.287 3/32 3/32 9/32
4444-104 0.103 0.003 0.112 0.005 0.318 3/32 1/8 5/16
4444-105 0.103 0.003 0.143 0.005 0.349 3/32 5/32 11/32
4444-106 0.103 0.003 0.175 0.005 0.381 3/32 3/16 3/8
4444-107 0.103 0.003 0.206 0.005 0.412 3/32 7/32 13/32
4444-108 0.103 0.003 0.237 0.005 0.443 3/32 1/4 7/16
4444-109 0.103 0.003 0.299 0.005 0.505 3/32 5/16 1/2
4444-110 0.103 0.003 0.362 0.005 0.568 3/32 3/8 9/16
5444-610 0.103 0.003 .404 0.005 0.610 3/32 N/A N/A
4444-111 0.103 0.003 0.424 0.005 0.630 3/32 7/16 5/8
4444-112 0.103 0.003 0.487 0.005 0.693 3/32 1/2 11/16
  Results 26 - 50 of 202  1 2 3 4 5 »  
Site Map | Site Credits: Ecreativeworks